| Seio™ Electronic Controller |
 |
|
• Built-In Auto High/Low Speed
• Variable Timing 15 sec. to 30 min.
• Run One or Two Seio Pump
• Auto Restart After Feeding
• Use Only For Models: Seio M1100, M1500
and M2600
NOTE: Seio Electronic Controller use
2amp slow blow fuse. |
| |
|
|
| Description |
|
|
| The Seio™ Electronic Controller will vary the current on two Seio™ water pumps. Unlike wave makers or timers, the Seio™ Electronic Controller keeps the pumps running at all times and will ramp the pumps up from 30% flow to 100% flow then back down. It has the ability to set the time cycles that best suit your aquatic habitat and time delay buttons for feeding. Seio™ Electronic Controller is a complete water movement system that no aquarium should be without. |
|
| |
|
|
| Models |
|
|
| Item # |
Dimension
L x H x W |
Description |
Weight |
UPC # 0006760 |
SEIO EC10136 |
8.5in x 6.5in x 2.75in |
Seio™ Electronic Controller |
2 lbs |
1013 6 |
|
| |
| Installation |
*ONLY FOR SEIO™ PUMPS OF THE FOLLOWING MODELS:
Seio M1100
Seio M1500
Seio M2600
|
 |
|
|
| Click here to see directions for installation in Instruction booklet (PDF) |
|
To open Instruction Booklet, please download Adobe Reader, click here  |
